You don’t need to spend a lot of money to fix a hole in drywall. This method will show you how simple and inexpensive it can be.
Required Tools and Materials
Drywall mud, spackle
Piece of drywall that is larger than hole
Use your knife to make the hole into a rectangle or square shape. Screws will not be used here, so you don’t need to create the hole on a stud.
Get the dimensions of the hole. Cut a piece of drywall larger than the holes by a few inches on each side. If the hole is 4 x 4 inches, cut a drywall so it measures 8 x 8 inches.
Place the razor knife on the drywall backside; this is the side minus the white paper. Slice midway through the drywall. When trying to cut a piece of drywall, do not cut the paper at the front side.
Bend the drywall by the two inch cut backside. Carefully strip the paper on the front. Peel only from the center, not the corner. Repeat this on all sides until the drywall looks like it is stuck on paper. When trying to fix a hole in drywall, this step is essential.
Apply the drywall mud on the sides where the hole is. Put the piece over the hole. Don’t push the piece in the wall.
Put the drywall at the rear of the paper patch. Be certain there are no air bubbles when you are smoothing the paper. Work from the middle to the outer area damaged.
Let the drywall dry. Sand the texture when it has dried. Sand it until the texture corresponds to the undamaged area.
When you are done sanding, it is time to paint the wall. Let it dry for 24 hours. This will allow the mud to settle in completely.
Tips and Warnings
Try pushing the patch after forty eight hours as a test. When creating the cuts, you can utilize a pen. This will make it easier to mark the cuts. Remember that the cutting does not have to be precise. The two inch overlay will give you plenty of room for errors.
When studying how to fix a hole in drywall. It may be a good idea to keep a drop cloth around. This type of work can get messy. The drop cloth will ensure that things can be cleaned easily.