How to Repair Windows

Jalousie windows are frequently used in countries with mild weather conditions. Sometimes, the louver may snap. Here is a guide on how to repair windows and replace the jalousie glass.

Required Tools and Materials

Replacement glass
Silicone lubricant

Step 1

Press the window handles to fully open the louvers. The slat should be level or almost fully so.

Step 2

Now you have to lift the frame clips on the broken louver. Lift it up with your thumb. To remove the slat, slide it towards your direction. If you’re having trouble, use a screwdriver’s tip to lift the clips.

Step 3

Use the screwdriver tip to clean up any broken glass pieces. Place the broken glass pieces in a container. Discard them properly.

Step 4

To understand how to repair windows, get the new louver. Set its lower edge on the frame clip sides. Push the top of the louver so it can be set into the frames of the channel. Do this on either side. Keep doing this until the clips snap on the louver’s top edge.

Step 5

To open the louver, move the window handle counterclockwise.

How to Fix the Jalousie Crank

Step 1

Take out the crank arm off the window. Do this by removing the screws.

Step 2

Use a cloth to clean the gearbox. Use a cleaner to get rid of grease. A wire brush is ideal for cleaning crannies.

Step 3

Next, the gears have to be turned so every notch is hooked to a groove. Loosen or tighten the screws so they become aligned. Ensure there is no dirt stuck in the gears.

Step 4

Put the crank back. Slide it above the gearbox. Put the screws back in place. The jalousie window is now ready.

Tips and Warnings

Make sure you determine what components are necessary. Aside from the crank, the arm is another component that may need to be replaced. This is the part that pulls and pushes the window. In some cases, it may be necessary to apply some silicone lubricant.

If you need to buy replacement parts, make sure you get quality components. Before you buy, specify the component you need. If you buy the wrong part, it will not work.

If the jalousie isn’t working, check the rivets. Be certain they are tight. Apply a lubricant so you can prolong the life of the replacement parts.

Studying how to repair windows is not that difficult, but you need to make sure you follow the directions as specified.

Rate this guide

0 / 5 (0 votes)

Related Posts