An advanced and popular video game console designed and manufactured by Sony Entertainment Corp., the PlayStation 3 offers gamers a unique gaming experience. Even if this famous gaming device has advance software and parts, owners still encounter troubles with the console. In order to learn more about this device, let us take a look at the different PlayStation 3 error codes.

Error Codes

One of the most common errors that users encounter when they play games using PS3 is the error 0710102. It is also known as the DNS error, which means that when players encounter this error, there is not available DNS server. Another trouble that people can encounter when the play using this device is the 8001050B error. This error occurs when the owner inserts a Blu Ray disc. When the error occurs, there is problem with playing hard drive games. To resolve these problems, you can turn the device off and remove the hard drive.

If you encounter the 80010510 error, it means that there is trouble playing hard drive games in the console. On the other hand, the 8002b241 error means that there is problem with the audio of the DVI. When the error 80029023 occurs, then there is trouble with exchanging key information while the 80029024 error means that there is problem finding an IP address.

The player cannot install downloaded games if the 80029564 occurs. The system is having trouble updating the XMB firmware when the 8002F997 appears. The user cannot save the game when the error 8003051E occurs. If you are having problem saving the system settings, the 80031150 appears.

Another error that is commonly encountered by players is the 80130203. This error means that the device is having problems connecting to the network. When the connection to the network has been dropped, you will encounter the 80710092 error. If the device is having troubles connecting to the router, the 80710102 will appear on the screen. To solve the trouble, you need to reboot and reconfigure the router.

If the system fails to connect to the server, you experience the 80710541 error. Finally, the 80710B23 error means that the network of the gaming console is busy to respond.

Additional Tips and Other Important Information

One of the basic steps that you need to do when you encounter any of the error is to reboot the system. If you cannot restart the gaming console, you can unplug it and plug it back after several minutes. Check there are loose cables and remove the hard disk. Replace the hard disk and see if the problem persists.

Like all gaming platforms, the Xbox 360 is beset with a number of problems and errors that may disturb the gaming experience of the console’s users. One of such errors that Xbox 360 users commonly encounter is error E71 and it is signified by a blinking red light in the lower-right quadrant of the console’s main button. Error E71 is typically caused by the failure of the unit to update itself via the Xbox Live service. When confronted by this error, don’t worry. Learning how to repair Xbox 360 E71 error is easy as the error is a far cry from the dreaded red ring of death since it is in no way caused by more serious problems such as overheating and hardware failure. This is why it is important that every Xbox 360 user knows how to repair Xbox 360 E71 error since it is one of the easiest Xbox 360 errors to solve.

When learning how to repair Xbox 360 E71 error for the first time, know that reformatting one’s Xbox 360 hard drive is the most straightforward way to address the problem. Before proceeding with reformatting the hard drive, please remember that the process will make all the data saved in the hard drive will be lost and won’t be recovered anymore. Make sure then that the hard drive has no indispensable data before formatting it.

To format the hard drive, boot up your console and make sure that there is no disc loaded in its tray. In the dashboard, go to the system section and select the memory tab which will let you view the console’s storage devices. Format the unit’s hard disk by selecting it and pressing the Y button on the controller. Choose “Format” in the options. Keep in mind not to turn off the console while the process is taking place as doing so may cause serious damage to the unit.

If one is learning how to repair Xbox 360 E71 error, then one must learn how to restore one’s Xbox 360 into its factory settings. Restoring the Xbox 360 to its factory settings may be necessary if formatting the console’s hard disk did not solve the E71 error. To do this, go to the system information window in the console settings menu. While there, press the following buttons in this sequence: left trigger, right trigger, X button, Y button, left bumper, right bumper, Y button, up in the directional button, left in the directional button, and up again.

If the above steps detailing how to repair Xbox 360 E71 error were not able to solve the problem then consider taking the unit to a Microsoft service center as a last resort. Sure, you won’t be able to satiate your gaming needs for some time but you can be sure that your console will work as it should when you get it back.

Since the E71 error is one of the most common problems encountered by Xbox 360 users, learning how to repair Xbox 360 E71 error is a worthwhile exercise for any owner of the console as it lets users to solve the otherwise simple error quickly and easily.

One of the latest additions to the video game consoles released by Sony Computer Entertainment, PlayStation 3 (also known as PS3) was initially released in Japan on 11 November 2006. This game console was released by Sony to compete with other game consoles available in the commercial market such as the Xbox 360 from Microsoft. One of the common problems experienced by users of PS3 is the yellow light of death. To avoid spending money to pay for professionals to fix the problem, below are the steps that you can follow if you want to know how to repair the PlayStation 3 yellow light of death.

Procedures

The materials that you need to repair the problem include a clean cloth, thermal compound grease, #4 Philips screwdriver, #00 Philips screwdriver, #1 Philips screwdriver,T10 Torx screwdriver and a heat gun. To fix the problem, the first step is to unplug the device. Remove all the cables and accessories connected to the game console. Place the console on the cloth. Lift off the door of the hard drive at the side of the device. Get the #1 screwdriver and unscrew the blue screw. Remove the drive carefully and place it on a cloth.

If your PS3 is not covered by a warranty, then you can remove the sticker on the space where the hard drive was placed. Remove the rubber foot and place in a small bag with the blue screw. Open the top of the device and take out the ribbon cables attached to first generation PS3s. Remove the Blu-ray drive together with the data cables and power cord. Unscrew the WiFi antenna screws as well as the antenna.

Remove the device’s top case and the protective casing. Remove the fan and the cables attached to the battery as well as the hard drive bay. Separate the circuit board from the heat sink and place these on a clean cloth.

Adjust the device’s temperature between 300 to 500 degrees Fahrenheit using the heat gun. Heat the GPU and CPU chips for six minutes. When the circuit board has cooled down, apply thermal compound to the chips. Reverse the disassembly process. Plug the device and check if the problem was fixed.

Additional Tips and Other Important Information

To avoid causing further damages in the device, it is best to work in a well-lit and clean environment. Always check the warranty of the game console before you fix it by yourself. If the device is still covered by the warranty, do not open the device and the best thing to do is to bring it to any Sony Computer Entertainment service center.

One of the features that Xbox 360 has is its capability to display the codes of the error that it has just encountered. With this feature, users can quickly point out the problems that their console has encountered. One of such errors that the console commonly displays in the event of an error is the E68 code. This code has plagued many Xbox 360 users and most of the time it appeared just right after the console was purchased. The E68 code is basically an error signifying to the user that the hard drive of the unit has failed. Other than the code and the message advising the user to contact Microsoft, the E68 error may be signified by a blinking red light on the unit’s main button.

Luckily, the error is easy to solve and it will be worthwhile for Xbox 360 users to learn how to repair the Xbox 360 E68 error by themselves.

The first thing to know when learning how to repair Xbox 360 E68 error for the first time is that there are times when the error just comes up for no reason at all. This is why after encountering the error message, one should reboot the console and see if the message still comes up. Rebooting once or twice may make the error message to go away.

If the error still persists then its time to isolate other factors that may be causing the problem. When learning how to repair Xbox 360 E68 error for the first time, know that some peripherals may be the ones that are the source of the error. This is why one should detach the console’s hard drive first. After detaching it, boot the console and connect it to the Internet. Try to update the console’s firmware with the Xbox Live service.

Knowing how to repair Xbox 360 E68 error is knowing which peripherals must be detached from the system when troubleshooting. Detach the accessories of the unit such as the memory cards and any other peripherals that may be the cause of the E68 error. Boot the console and see if the error message still comes up.

If after all of the steps how to repair Xbox 360 E68 error detailed above are done and the error is still there, then it is time to call Microsoft and send over one’s console to their service center.

Knowing these steps concerning how to repair Xbox 360 E68 error will allow one to address the problem easily and come up with the necessary solution if ever the error comes up.

The Wii is one of the latest video gaming consoles offered in the commercial market today. This device is designed and manufactured by Nintendo and different accessories can be connected to the console like the wireless controller and the remote. There are times when the device freezes before, during and after a game. To know how to fix a Wii that freezes, it is important to have ideas about the possible causes of this problem.

Procedures

If the device freezes randomly, it is possible that the air vents of the console was blocked. To resolve this, try to reset or turn the device off. If the buttons in the device do not function, then the best move is to unplug the console’s AC adapter. Look at the air vents to see if these are blocked. If the vents were blocked, you need to transfer your Wii to a well-ventilated place. It is important to spray the console with compressed air.

If the console freezes while you are playing the game, it is possible that the disc that you are using have damages or scratches. When this occurs, remove the disc and turn the device off. Afterwards, check the disc for damages. If there are no damages, try to put another disc in the console and turn it on. If the device does not freeze, then it is possible that there are some issues with the previous game that you are using. To check the problems with the game, you can visit the website of Nintendo.

If there is no problem with the disc, then you need to check the accessories connected to the device. Look at the cables if these are loose. Sometimes this video gaming console freezes when the cables attached are loose.

If the cables are still in good condition, then you need to turn your Wii off. Remove the disc and the memory card. Remove the cables connected to your Wii. Afterwards, remove the hard drive. Wait for several minutes before you replace the Wii. Turn the console on to see if the problem persists. If the device still freezes, you need to send the video game console for service since there may be parts that need to be replaced.

When the problem was caused by overheating and you cannot find compressed air, you can try the towel technique. Get two towels and cover and cover the top and bottom of the device with the towels. Wait until the device has cooled down and check if the problem persists.

One of the problems experienced by owners of Xbox 360, a sophisticated video game console launched by Microsoft, is the red rings of death. The possible causes of the problem include hard drive failure and overheating. In most instances, when this problem occurs, the device is sent to Xbox for service. However, if you think that the problem is temporary, then you need to learn how to repair your Xbox 360 efficiently.

Procedures

If the problem was caused by overheating, the initial step is to unplug the device and remove all the accessories and cables attached or connected to the video game console. When you see three lights on the device, this is probably caused by system failure. To see if the problem is temporary, you can apply the towel technique. After unplugging the device, place the video game console on a towel. You also need to put another towel on top of the device. Wait for 10 minutes to 20 minutes. Plug the game console. If the red ring of death disappears, then the problem is possibly caused by overheating.

If you do not want to try the towel technique, then you need to unplug the console. Wait for an hour or until your Xbox 360 has cooled down. Plug it to see if the problem was resolved.

Another way of checking if the problem is temporary is to see if the light is orange or green. If the light is orange or red, then the problem is temporary. You have to unplug the device and wait for the device to cool down. However, if the light is green, then the cause of the problem is hard drive failure.

If you think that the damage is permanent, you need to bring the device to any Microsoft service center. Avoid opening the device or removing the warranty sticker. When the problem is permanent, the service center will replace the damaged or faulty parts and return the console within a month.

Additional Tips and Other Important Information

If you failed to register the video game console when you bought it or if the device is no longer covered by the warranty, then you can still fix the problem by yourself. However, to avoid causing further damages in the video game console, you need to follow the steps in repair guides issued by Xbox. You can also ask assistance from professionals or visit the website of Xbox for inquiries.

The Xbox 360 is one of the latest video gaming consoles available in the commercial market. Many consumers like to purchase this merchandise because it has advanced features like a 250-gigabyte hard disk, a wired headset as well as multimedia capabilities. Some of the accessories that can be connected to the device are dance mats, wireless controllers and memory cards. A common trouble encountered by owners of the video game console is the open tray error. Follow the easy steps discussed below to learn how to fix Xbox 360 open tray error easily.

Procedures

When you encounter this problem, the initial step is to restart the device. If you cannot reboot the system, just unplug it and wait for two to five minutes before you plug it. Remove the cables attached to the back of the device one by one. Return the cables one by one. Check if the problem was solved.

If you still encounter the error, then the next thing to do is to remove the hard drive. When you removed the drive, place it on a soft cloth. Wait for several minutes and return it to the device. If you have an extra hard drive for your Xbox 360, insert this into the console. Turn the console on to see if the open tray error exists.

If you encounter the error while playing the game, the best thing to do is to unplug the console. Afterwards, remove the disc that you are playing. Check if there are scratches and damages in the disc. If you see scratches on the disc, replace a new disc and turn the device on to see if the error persists. If the problem was resolved, then the disc that you are using is malfunctioning or faulty.

If all the solutions mentioned above failed to solve the problem, check the warranty of the console. If it is still covered by the warranty, the best move is to send it for service. Do not open the device and do not tamper the warranty sticker. However, if the device is no longer covered by the warranty, you can open the lens and check the DVD lenses. Get cotton buds and use these to remove dust and dirt on the lenses. If you do not want to send your console for service, you can check the website of Xbox 360. Search for repair guides that you can use to solve the open tray error.

Engaging in a paintball gun battle can be a lot like going to war, except of course for the fact it isn?t lethal. But perhaps the biggest casualties in these skirmishes are the paintball guns themselves. Some may take a malfunctioning marker for granted by simply getting a new one. However, if one only knows how to maintain a paintball gun, their weapon of choice doesn?t have to be deemed expendable.

It would only be only natural for one to get dirty when embroiled in a particularly rough game out in the field. Sure enough, one can expect that some dirt will tend to go down the barrel of their paintball gun as they are playing. After each game, one must clean out all the dirt that had collected on their marker with the use of a squeegee. And if a paintball should break in the barrel, it should be fully unscrewed and cleaned from both of its ends again using a squeegee. This is important because dried paint lumps in the barrel would affect the performance of a paintball gun.

When out playing on a wet day, it would be best for a paintball gun to be stored in an upright position in order to allow the moisture to rise out from the marker. Most paintball guns are made from metal components, and a prolonged buildup of moisture would cause the gun to rust at a very fast rate. Needless to say, this will not bode well for a marker?s durability, so one must always keep their gun protected from harsh elements that would prove harmful to them.

A very important component of a paintball gun, the function of the hammer is to push the paintball into the barrel at a high velocity. One should always make certain that the hammer is oiled after each game. Like all movable metal objects, the hammer also requires lubrication in order to keep it functioning smoothly and to maintain its effectiveness.

Apart from the tips just mentioned, paintball gun manufacturers usually include guidelines for the proper use and care of their products. It is important to heed such procedures as the game of paintball is not just won solely on skill, but also in how effective one?s sidearm is. When one knows how to maintain a paintball gun properly, their trusty marker won?t ever fail them and will serve them well for a very long time.

One of the errors that have commonly plagued PlayStation3 gamers was the DNS error which prevented users from accessing the Internet through their PS3 consoles. The DNS error may be simple to solve but one may still have to try several solutions to get their units accessing the Internet again. Learning how to fix the DNS problem on a PlayStation 3 will help one pinpoint the correct solution that can address the error quickly and easily.

To start learning how to fix the DNS problem on a PlayStation 3, one must first remember that the easiest way to troubleshoot a problem is to isolate the different factors that may have been causing the problem. Therefore, the first thing that one must do is to reboot the modem that one’s PS3 is using to connect to the Internet. Wait for a while for the modem to cool off before turning it on again. After a few minutes, turn the modem on and try to connect the PS3 to the Internet. Oftentimes most DNS errors are solved just by doing this simple trick.

When learning how to fix the DNS problem on a PlayStation 3 for the first time, keep in mind that going for the simplest solution is the best way to go. Another simple solution to try out immediately when confronted by a DNS error is to upgrade the firmware for the unit. Note that this solution is possible only if an Internet connection can be established for the console. Upgrade the firmware by choosing it on the main menu.

If the DNS error still persists, then some other factors may be responsible other than the modem. Knowing how to fix the DNS problem on a PlayStation 3 entails knowing other factors that may be causing the persistence of the error. In cases in which the modem has already been rebooted and cooled off, it is advisable to check the firewall of the computers that are sharing the Internet connection with the PS3 unit. Turn them off, try to connect the PS3 console to the Internet, and see if the DNS error is still appearing.

Wrong configuration of the IP addresses used by the console can also be a reason for DNS errors. Remember that two IP addresses are typically used in a connection, so when learning how to fix the DNS problem on a PlayStation 3 for the first time, check if the two addresses are not reversed and are entered correctly.

When confronted with DNS errors, simple solutions are almost always the best solutions. This is why it is important that one has enough knowledge how to fix the DNS problem on a PlayStation 3 since DNS errors require thorough troubleshooting to pinpoint the correct solution for each situation.

One of the most advanced and sophisticated video game consoles launched by Microsoft, the Xbox 360 has special features like high definition games support, game downloads and movie rentals using the Xbox Live service. A common problem experienced by Xbox 360 users is the red ring of death. This problem is caused by various factors like overheating and hard drive failure. Below are the simple steps to follow if you want to know how to fix the red ring of death.

Procedures

Before you send the device for support, there are some steps that you can try to know if the problem is temporary or permanent. Overheating is one of the primary causes of the red ring of death. If the device flashes four rings, then the first thing to do is to cool it down to avoid causing further problems. Unplug the device and wait for half an hour before you check it again. You can also use the towel technique to check if the problem is temporary. After unplugging the device, get two towels and put one on top of the device and another at the bottom. Wait for 15 minutes and plug the device. If the red ring of death still occurs, then the problem is temporary.

If the technique discussed above failed, then the problem lies with the hard drive of the video game console. One of the signs that you need to send the device to the service center is when the power supply light turns green. However, if the light is red or orange, just unplug the device and wait for the console to cool down then plug it back.

If you need to send the console to the service center, you need to check the serial number of device. There is nothing to worry about charges because Xbox service centers repair video game consoles that suffer red ring of death for free. To make sure about the charges or any inquiries about the problems, it is best to check the website of Xbox.

Additional Tips and Other Important Information

Just to be sure that you will not have problems when you send the device to Xbox, check the warranty before you do anything or open the video game console. If the video game console is still under warranty, send it right away. It may take a month before you get the console back but at least you will be assured that you will not experience the same problem with your Xbox 360.