How to Repair a Dishwasher

A mechanical device that is designed for cleaning eating utensils as well as dishes. This device is commonly found in restaurants and homes because it makes dishwashing faster and easier. The standard width and depth of the device, which can be installed in kitchen cabinets is 61 centimeters in the United States and 60 centimeters in Europe. To know how to repair a dishwasher easily, it is best to have ideas about the common causes of damages in this device.

No Power

One of the problems experienced when using a dishwasher is the lack of power. To restore power, there are some parts of the device that you need to check like the door switch. If this part has not been damaged, then check the timer as well as the selector switch if these are damaged. If any of the parts is damaged, the best solution is to look for a replacement at local home improvement stores.

No Water

If you turn the device on and there is no water in the dishwasher, you need to check if the float is functioning well. Remove the float fr0m the device and clean it with sponge. Rinse the float and check if it moves up and down. If the float is damaged, then you need to replace it with a new one.

On the other hand, if the dishwasher will not stop filling with water, you need to check the volt-ohm meter of the device. To check if the meter is functioning well, you have to unplug the device and remove the meter. Clean the meter with a brush and avoid damaging the wires of the meter. Replace the meter and set it to Rx100. Plug the dishwasher, if the problem continues, then you need a new volt-ohm meter.

Leaks

If there are leaks in the device, the first thing to do is to check the dishwashing detergent box. Make sure that you do not overload detergent since this can cause leaks. If this is not the cause, then you need to check if you properly load the dishes and utensils in the machine. Another common cause of this problem is a loose door. To resolve this, remove the door gasket and clean it with a wire brush. Make sure that you remove dirt that can clog in the gasket. In addition, check if there are damages in the gasket. Replace the gasket and check if the door fits. If the gasket is damaged or malfunctioning, replace it with a new one.

Rate this guide

Related Posts